Introduction: (a mistake in the sign, of course, has been made, here is already corrected) (then table has been patched because of the wrong lcm_id issue) (in 15/Jan/2012 stable clks where added to the T0s after the HV tuning) After several cable connections clockphases have changed, in averaged: (NEW - OLD clks == - offsets) L1 -0.070 L2 -0.123 L3 -0.074 L4 -0.081 L5 -0.061 L6 -0.064 L7 -0.014 L8 -0.108 L9 -0.099 L10 -695.694 L11 -0.063 L12 +4.205 Previous T0 table is ID 94,617,161 so offsetsadder command is: ./offsetsadder -p intratical_11 -i 94617161 -A 0.070 -B 0.123 -C 0.074 -D 0.081 -E 0.061 -F 0.064 -G 0.014 -H 0.108 -I 0.099 -J 695.694 -K 0.063 -L -4.205 n11 after L10+12 reconnection Dec 2012 This set is an update of the n10 T0 set (ID 94617161) including the new clockphases after lines 10 and 12 reconnections: {0.070, 0.123, 0.074, 0.081, 0.061, 0.064, 0.014, 0.108, 0.099, 695.694, 0.063, -4.205} 01/12/2012 00:00 02/12/2012 00:00 Now, with the official interline offsets added: n11off after L10+12 reconnection Dec 2012 This set is an update of the n11 T0 set including the inter-line offsets measured by muon tracks reconstruction:{-1.26,-3.87,-0.50,-2.13,-3.42,-1.29,+0.63,+4.91,+0.27,-0.47,+3.96,+2.15} 01/12/2012 00:00 02/12/2012 00:00 ./offsetsadder -p intratical_11 -i 106817265 -A -1.26 -B -3.87 -C -0.50 -D -2.13 -E -3.42 -F -1.29 -G 0.63 -H 4.91 -I 0.27 -J -0.47 -K 3.96 -L 2.15 (STABLE - NEW clks == - offsets) L1 +0.064 L2 +0.114 L3 +0.063 L4 +0.075 L5 +0.053 L6 +0.052 L7 +0.005 L8 +0.101 L9 +0.081 L10 +0.266 L11 +0.060 L12 +0.235 T0 table to update is ID 107995369 so offsetsadder command is: ./offsetsadder -p intratical_12/log -i 107995369 -A -0.064 -B -0.114 -C -0.063 -D -0.075 -E -0.053 -F -0.052 -G -0.005 -H -0.101 -I -0.081 -J -0.266 -K -0.060 -L -0.235 n12 after HV tun Aug-Dec12 & L10+12 Dec12(stableCLK) This set is an update of the n12 T0 set with unstable clockphases (ID 107995369) now including the stable clockphases at 15/01/2012: {-0.064, -0.114, -0.063, -0.075, -0.053, -0.052, -0.005, -0.101, -0.081, -0.266, -0.060, -0.235} 68307 68343 Now, with the official interline offsets added: n12off after HV tun Aug-Dec12 & L10+12 Dec12(stableCLK) This set is an update of the n12 T0 set with stable clockphases (ID 107995665) now including the inter-line offsets measured by muon tracks reconstruction:{-1.26,-3.87,-0.50,-2.13,-3.42,-1.29,+0.63,+4.91,+0.27,-0.47,+3.96,+2.15} 68307 68343 ./offsetsadder -p intratical_12/log -i 107995665 -A -1.26 -B -3.87 -C -0.50 -D -2.13 -E -3.42 -F -1.29 -G 0.63 -H 4.91 -I 0.27 -J -0.47 -K 3.96 -L 2.15 106817265 #11: after L10+12 reconnection Dec 2012(02/12/2012 11:11:56) 2012-12-02 00:00:00.0 105551566 #10D: intermediate set for March 2012 after #10(16/10/2012 17:47:20) 2012-03-17 13:42:00.0 105551472 #10F: intermediate set for July 2012 after #10(16/10/2012 16:35:00) 2012-07-30 19:26:00.0 94617161 #10: after HV tuning Dec11(23/01/2012 20:39:00) 2011-12-12 15:44:00.0 65091301 #9: after HV tuning Jun11(14/07/2011 17:56:08) 2011-06-08 00:00:00.0 59241588 #8: after L6+9 reconection and HVtunning Nov10(04/02/2011 20:09:25) 2010-11-06 00:00:00.0 53408684 #7: T0 after HV tunning 07/2010 NO BUG(03/09/2010 12:14:53) 2010-07-13 00:00:00.0 60460030 #G/4: for G/4 period(07/04/2011 16:08:35) 2010-06-23 13:01:00.0 60460029 #G/2: for G/2 period(07/04/2011 16:06:55) 2010-06-22 18:21:00.0 37347048 #6: final L10+12 reconnection after HV L10+12(13/01/2010 13:14:15) 2009-11-13 00:00:00.0 36934336 #5: Final T0 set including L10+L12 reconnection(13/11/2009 17:38:46) 2009-11-07 00:00:00.0 35045036 #4: final version after HV + K40 corrections(21/10/2009 17:39:31) 2009-08-13 15:34:00.0 16722429 #3: in situ L1-10+DRL11-12 (interlink corrected)(13/10/2008) 18/02/2008 2008-05-30 00:00:00.0 16703026 #2: In situ LOB calibration (new fit)(10/07/2008) 2007-12-07 14:43:00.0 10746202 #1: 1 in situ line 1-5(04/04/2008) 2007-01-29 00:00:00.0 OLD try with wrong sign on clks.... evalu155:agusanlo/macros/tical> ./offsetsadder -p line_10_12_clk_2012 -i 94617161 -r 68172 -A -0.070 -B -0.123 -C -0.074 -D -0.081 -E -0.061 -F -0.064 -G -0.014 -H -0.108 -I -0.099 -J -695.694 -K -0.063 -L 4.205 ******************************************* * * * W E L C O M E to R O O T * * * * Version 5.26/00 14 December 2009 * * * * You are welcome to visit our Web site * * http://root.cern.ch * * * ******************************************* ROOT 5.26/00 (trunk@31882, Dec 14 2009, 20:18:36 on linux) CINT/ROOT C/C++ Interpreter version 5.17.00, Dec 21, 2008 Type ? for help. Commands must be C++ statements. Enclose multiple statements between { }. Welcome to rootlogon.C at .../macros/utiles For my own style use: gROOT->SetStyle("ownStyle"); For set the AntDST use: setAntDST(); For activate the storage of errors: TH1::SetDefaultSumw2(); > Wellcome to "offsetsadder"! > ARS_T0_VERSION used in the offsets computation (for the T0s): "94617161" > Last used run in the offsets computation (for the clockphases): 68172 > Searching automatically for tables IDs: > old runTimeStamp = 1326692000 (Mon, 16 Jan 2012 05:33:20 +0000 (GMT) + 0 nsec) > old CLOCK_RUN_ID = 164428 > old CLOCK_CONFIGURATION_ID = 275 > new runTimeStamp = 1354233600 (Fri, 30 Nov 2012 00:00:00 +0000 (GMT) + 0 nsec) > new CLOCK_RUN_ID = 166938 > new CLOCK_CONFIGURATION_ID = 275 > Getting old T0s... > Applying the following offsets to the T0s: · Line 1: -0.07 ns · Line 2: -0.123 ns · Line 3: -0.074 ns · Line 4: -0.081 ns · Line 5: -0.061 ns · Line 6: -0.064 ns · Line 7: -0.014 ns · Line 8: -0.108 ns · Line 9: -0.099 ns · Line 10: -695.694 ns · Line 11: -0.063 ns · Line 12: +4.205 ns > Output ASCII to DB file: /l/agusanlo/data/tical/line_10_12_clk_2012/cal2DB.txt > Histogram Statistics CLKs: > Minimum difference: -0.042 > Maximum difference: 0.021 > Histogram Statistics OFFSETs: > Minimum difference: -695.694 > Maximum difference: 4.205