Introduction: (a mistake in the sign, of course, has been made, here is already corrected) (then table has been patched because of the wrong lcm_id issue) (in 15/Jan/2012 stable clks where added to the T0s after the HV tuning) After several cable connections clockphases have changed, in averaged: (NEW - OLD clks == - offsets) L1 -0.070 L2 -0.123 L3 -0.074 L4 -0.081 L5 -0.061 L6 -0.064 L7 -0.014 L8 -0.108 L9 -0.099 L10 -695.694 L11 -0.063 L12 +4.205 There are available the next T0s: ... YES #10D+off Before HV tuning (ID 105,551,565) NO #11+off After HV tuning and before reconection NO #12u+off After HV tuning and reconection, with unstable clockphases YES #12+off After HV tuning and reconection, with stable clockphases (ID 107,995,666) now To provide #12u+off I can use ID 107,995,369, that is indeed #12u, just need to add the interline muon offsets To provide #11+off I can use #12u+off and just remove the reconnection clockphases changes Offsetsadder command for #12u+off is: ./offsetsadder -p intratical_11_12 -r 68343 -i 107995369 -A -1.26 -B -3.87 -C -0.50 -D -2.13 -E -3.42 -F -1.29 -G 0.63 -H 4.91 -I 0.27 -J -0.47 -K 3.96 -L 2.15 n12uoff after L10+12 reconnection Dec 2012 unclockphases This set is an update of the n12u T0 set (ID 107995369) including the inter-line offsets measured by muon tracks reconstruction:{-1.26,-3.87,-0.50,-2.13,-3.42,-1.29,+0.63,+4.91,+0.27,-0.47,+3.96,+2.15} 02/12/2012 00:00 17/12/2012 00:00 Now #12u+off has ID 112,371,974. Then, offsetsadder command for #11+off is: ./offsetsadder -p intratical_11_12 -r 68172 -i 112371974 -A -0.070 -B -0.123 -C -0.074 -D -0.081 -E -0.061 -F -0.064 -G -0.014 -H -0.108 -I -0.099 -J -695.694 -K -0.063 -L 4.205 n11off after L10+12 reconnection Dec 2012 This set is an update of the n12uoff T0 set (ID 112371974) removing the unstable clockphases after lines 10 and 12 reconnections: {0.070, 0.123, 0.074, 0.081, 0.061, 0.064, 0.014, 0.108, 0.099, 695.694, 0.063, -4.205} 16/11/2012 00:00 01/12/2012 00:00 107,995,666 #12+off: after HVtun Aug-Dec12 & L10+12 Dec12(stableCLK)(15/01/2013 17:15:52) 2012-12-11 13:26:00.0 112,371,974 #12u+off: after HVtun Aug-Dec12 & L10+12 Dec12(unstableCLK)(26/03/2013 18:11:47) 2012-12-02 00:00:00.0 112,371,975 #11+off: after HVtun Aug-Dec12(26/03/2013 18:16:09) 2012-11-16 00:00:00.0 105,551,565 #10D+off: intermediate set for July 2012 after #10(16/10/2012 16:59:27) 2012-07-30 19:26:00.0 105,551,474 #10B+off: intermediate set for March 2012 after #10(16/10/2012 17:52:58) 2012-03-17 13:42:00.0 99,366,010 #10+off: after HV tuning Dec11(29/05/2012 12:29:47) 2011-12-12 15:44:00.0 99,366,011 #9+off: after HV tuning Jun11(29/05/2012 13:18:43) 2011-06-08 00:00:00.0 99,366,032 #8+off: after L6+9 reconection and HVtunning Nov10(29/05/2012 13:19:38) 2010-11-06 00:00:00.0 99,366,012 #7+off: T0 after HV tunning 07/2010 NO BUG(29/05/2012 13:21:33) 2010-07-13 00:00:00.0 99,366,033 #G/4+off: for G/4 period(29/05/2012 13:22:36) 2010-06-23 13:01:00.0 99,366,013 #G/2+off: for G/2 period(29/05/2012 13:23:20) 2010-06-22 18:21:00.0 99,366,014 #6+off: final L10+12 reconnection after HV L10+12(29/05/2012 13:24:15) 2009-11-13 00:00:00.0 99,366,015 #5+off: Final T0 set including L10+L12 reconnection(29/05/2012 13:25:47) 2009-11-07 00:00:00.0 99,366,034 #4+off: final version after HV + K40 corrections(29/05/2012 13:26:43) 2009-08-13 15:34:00.0 99,366,016 #3+off: in situ L1-10+DRL11-12 (interlink corrected)(29/05/2012 13:28:07) 2008-05-30 00:00:00.0 99,366,035 #2+off: In situ LOB calibration (new fit)(29/05/2012 13:28:53) 2007-12-07 14:43:00.0 99,366,017 #1+off: 1 in situ line 1-5(29/05/2012 13:29:57) 2007-01-29 00:00:00.0 evalu155:agusanlo/macros/tical> ./offsetsadder -p intratical_11_12 -r 68343 -i 107995369 -A -1.26 -B -3.87 -C -0.50 -D -2.13 -E -3.42 -F -1.29 -G 0.63 -H 4.91 -I 0.27 -J -0.47 -K 3.96 -L 2.15 ******************************************* * * * W E L C O M E to R O O T * * * * Version 5.26/00 14 December 2009 * * * * You are welcome to visit our Web site * * http://root.cern.ch * * * ******************************************* ROOT 5.26/00 (trunk@31882, Dec 14 2009, 20:18:36 on linux) CINT/ROOT C/C++ Interpreter version 5.17.00, Dec 21, 2008 Type ? for help. Commands must be C++ statements. Enclose multiple statements between { }. Welcome to rootlogon.C at .../macros/utiles For set the AntDST use: setAntDST(); For activate the storage of errors: TH1::SetDefaultSumw2(); > Wellcome to "offsetsadder"! > ARS_T0_VERSION used in the offsets computation (for the T0s): "107995369" > Last used run in the offsets computation (for the clockphases): 68343 > Searching automatically for tables IDs: > LCM_DATE = 121210 ( 10/Dec/2012 ) > old runTimeStamp = 1355204000 (Tue, 11 Dec 2012 05:33:20 +0000 (GMT) + 0 nsec) > old CLOCK_RUN_ID = 167029 > old CLOCK_CONFIGURATION_ID = 276 > new runTimeStamp = 1355184000 (Tue, 11 Dec 2012 00:00:00 +0000 (GMT) + 0 nsec) > new CLOCK_RUN_ID = 167027 > new CLOCK_CONFIGURATION_ID = 276 > Getting new clockphases... > Getting old T0s... > Applying the following offsets to the T0s: · Line 1: -1.26 ns · Line 2: -3.87 ns · Line 3: -0.5 ns · Line 4: -2.13 ns · Line 5: -3.42 ns · Line 6: -1.29 ns · Line 7: +0.63 ns · Line 8: +4.91 ns · Line 9: +0.27 ns · Line 10: -0.47 ns · Line 11: +3.96 ns · Line 12: +2.15 ns > Output ASCII to DB file: /l/agusanlo/data/tical/intratical_11_12/cal2DB.txt > Histogram Statistics CLKs: > Minimum difference: -0.022 > Maximum difference: 0.047 > Histogram Statistics OFFSETs: > Minimum difference: -3.87 > Maximum difference: 4.91 root [0] .q root [1] > Finished! evalu155:agusanlo/macros/tical> ./offsetsadder -p intratical_11_12 -r 68172 -i 112371974 -A -0.070 -B -0.123 -C -0.074 -D -0.081 -E -0.061 -F -0.064 -G -0.014 -H -0.108 -I -0.099 -J -695.694 -K -0.063 -L 4.205 ******************************************* * * * W E L C O M E to R O O T * * * * Version 5.26/00 14 December 2009 * * * * You are welcome to visit our Web site * * http://root.cern.ch * * * ******************************************* ROOT 5.26/00 (trunk@31882, Dec 14 2009, 20:18:36 on linux) CINT/ROOT C/C++ Interpreter version 5.17.00, Dec 21, 2008 Type ? for help. Commands must be C++ statements. Enclose multiple statements between { }. Welcome to rootlogon.C at .../macros/utiles For set the AntDST use: setAntDST(); For activate the storage of errors: TH1::SetDefaultSumw2(); > Wellcome to "offsetsadder"! > ARS_T0_VERSION used in the offsets computation (for the T0s): "112371974" > Last used run in the offsets computation (for the clockphases): 68172 > Searching automatically for tables IDs: > LCM_DATE = 121217 ( 17/Dec/2012 ) > old runTimeStamp = 1354426400 (Sun, 02 Dec 2012 05:33:20 +0000 (GMT) + 0 nsec) > old CLOCK_RUN_ID = 166956 > old CLOCK_CONFIGURATION_ID = 275 > new runTimeStamp = 1354233600 (Fri, 30 Nov 2012 00:00:00 +0000 (GMT) + 0 nsec) > new CLOCK_RUN_ID = 166938 > new CLOCK_CONFIGURATION_ID = 275 > Getting new clockphases... > Getting old T0s... > Applying the following offsets to the T0s: · Line 1: -0.07 ns · Line 2: -0.123 ns · Line 3: -0.074 ns · Line 4: -0.081 ns · Line 5: -0.061 ns · Line 6: -0.064 ns · Line 7: -0.014 ns · Line 8: -0.108 ns · Line 9: -0.099 ns · Line 10: -695.694 ns · Line 11: -0.063 ns · Line 12: +4.205 ns > Output ASCII to DB file: /l/agusanlo/data/tical/intratical_11_12/cal2DB.txt > Histogram Statistics CLKs: > Minimum difference: 0 > Maximum difference: 0 > Histogram Statistics OFFSETs: > Minimum difference: -695.694 > Maximum difference: 4.205 root [0] Error in : illegal world coordinates range: x1=0.000000, y1=-0.131250, x2=0.000000, y2=1.181250 Error in : illegal axis coordinates range: xmin=0.000000, ymin=0.000000, xmax=0.000000, ymax=1.050000 .q root [1] > Finished!