lunes, 19 de marzo de 2012 intertical_9 calibration: Those are the ones with the Laser position corrected. For the other ones look for intertical_9_OLD. #9 #9+off: 65091301 set including laser offsets 9 new T0 set using the 65091301 T0 set including lines offsets computed from 29/06/2011 to 12/12/2011 with the laser position corrected Log available at "ific.uv.es/~agusanlo/calibrations/intertical_9/" #10 #10+off: 94617161 set including laser offsets 9 new T0 set using the 94617161 T0 set #10 including preliminary laser offsets computed from 29/06/2011 to 12/12/2011 with the laser position corrected Log available at "ific.uv.es/~agusanlo/calibrations/intertical_9/" /////////////////////////////////////////////////////////////////////////////////////////////////////////// Interline calibration performed with 25 standard Laser-OB calibration runes from 29/06/2011 to 12/12/2011: online calibration "2011:V4.0" modified with real alignment for each run (ASCII calibration files were created): > LABEL = "2011:V4.0" ( VERSION_ID = ? ) > ARS_T0_VERSION = 65091301 walk correction enabled, no more corrections (cross talk) in consideration taken Offsets Found and Applied: Line 1 -> -3.3 ns Line 2 -> -3.5 ns Line 3 -> +0.2 ns Line 4 -> -2.5 ns Line 5 -> -3.4 ns Line 6 -> -0.7 ns Line 7 -> -0.1 ns Line 8 -> +7.0 ns Line 9 -> -0.6 ns Line 10 -> +0.1 ns Line 11 -> +5.1 ns Line 12 -> +1.5 ns Comparing with OLD offsets (#9 bad laser position): ++++++++++++++++++++ Old #9 Line 1 -> -2.6 ns Line 2 -> -3.0 ns Line 3 -> +0.4 ns Line 4 -> -2.0 ns Line 5 -> -3.4 ns Line 6 -> -0.4 ns Line 7 -> -0.1 ns Line 8 -> +7.0 ns Line 9 -> -1.0 ns Line 10 -> -0.2 ns Line 11 -> +4.4 ns Line 12 -> +1.0 ns ++++++++++++++++++++ Lines with important changes: 12, 11, 4, 2, 1 #9 with laser offsets new T0 ID 96,917,118 #10 with laser offsets new T0 ID 96,917,217 /////////////////////////////////////////////////////////////////////////////////////////////////////////// evalu155:agusanlo/macros/tical> ./offsetsadder -p intertical_9 -i 65091301 -r 61510 -A -3.3 -B -3.5 -C 0.2 -D -2.5 -E -3.4 -F -0.7 -G -0.1 -H 7.0 -I -0.6 -J 0.1 -K 5.1 -L 1.5 ******************************************* * * * W E L C O M E to R O O T * * * * Version 5.26/00 14 December 2009 * * * * You are welcome to visit our Web site * * http://root.cern.ch * * * ******************************************* ROOT 5.26/00 (trunk@31882, Dec 14 2009, 20:18:36 on linux) CINT/ROOT C/C++ Interpreter version 5.17.00, Dec 21, 2008 Type ? for help. Commands must be C++ statements. Enclose multiple statements between { }. > Wellcome to "offsetsadder"! > ARS_T0_VERSION used in the offsets computation (for the T0s): "65091301" > Last used run in the offsets computation (for the clockphases): 61510 > Searching automatically for tables IDs: > old runTimeStamp = 1309325600 (Wed, 29 Jun 2011 05:33:20 +0000 (GMT) + 0 nsec) > old CLOCK_RUN_ID = 163345 > old CLOCK_CONFIGURATION_ID = 275 > new runTimeStamp = 1323648000 (Mon, 12 Dec 2011 00:00:00 +0000 (GMT) + 0 nsec) > new CLOCK_RUN_ID = 164147 > new CLOCK_CONFIGURATION_ID = 275 > Getting old T0s... > Applying the following offsets to the T0s: · Line 1: -3.3 ns · Line 2: -3.5 ns · Line 3: +0.2 ns · Line 4: -2.5 ns · Line 5: -3.4 ns · Line 6: -0.7 ns · Line 7: -0.1 ns · Line 8: +7 ns · Line 9: -0.6 ns · Line 10: +0.1 ns · Line 11: +5.1 ns · Line 12: +1.5 ns > Output ASCII to DB file: /l/agusanlo/data/tical/intertical_9/cal2DB.txt > Histogram Statistics CLKs: > Minimum difference: -0.035 > Maximum difference: 0.044 > Histogram Statistics OFFSETs: > Minimum difference: -3.5 > Maximum difference: 7 /////////////////////////////////////////////////////////////////////////////////////////////////////////// evalu155:agusanlo/macros/tical> ./offsetsadder -p intertical_9 -i 94617161 -r 61510 -A -3.3 -B -3.5 -C 0.2 -D -2.5 -E -3.4 -F -0.7 -G -0.1 -H 7.0 -I -0.6 -J 0.1 -K 5.1 -L 1.5 ******************************************* * * * W E L C O M E to R O O T * * * * Version 5.26/00 14 December 2009 * * * * You are welcome to visit our Web site * * http://root.cern.ch * * * ******************************************* ROOT 5.26/00 (trunk@31882, Dec 14 2009, 20:18:36 on linux) CINT/ROOT C/C++ Interpreter version 5.17.00, Dec 21, 2008 Type ? for help. Commands must be C++ statements. Enclose multiple statements between { }. Welcome to rootlogon.C For approved plots use: gROOT->SetStyle("BABAR"); For set the AntDST use: setAntDST(); > Wellcome to "offsetsadder"! > ARS_T0_VERSION used in the offsets computation (for the T0s): "94617161" > Last used run in the offsets computation (for the clockphases): 61510 > Searching automatically for tables IDs: > old runTimeStamp = 1326692000 (Mon, 16 Jan 2012 05:33:20 +0000 (GMT) + 0 nsec) > old CLOCK_RUN_ID = 164428 > old CLOCK_CONFIGURATION_ID = 275 > new runTimeStamp = 1323648000 (Mon, 12 Dec 2011 00:00:00 +0000 (GMT) + 0 nsec) > new CLOCK_RUN_ID = 164147 > new CLOCK_CONFIGURATION_ID = 275 > Getting old T0s... > Applying the following offsets to the T0s: · Line 1: -3.3 ns · Line 2: -3.5 ns · Line 3: +0.2 ns · Line 4: -2.5 ns · Line 5: -3.4 ns · Line 6: -0.7 ns · Line 7: -0.1 ns · Line 8: +7 ns · Line 9: -0.6 ns · Line 10: +0.1 ns · Line 11: +5.1 ns · Line 12: +1.5 ns > Output ASCII to DB file: /l/agusanlo/data/tical/intertical_9/cal2DB.txt > Histogram Statistics CLKs: > Minimum difference: -0.03 > Maximum difference: 0.035 > Histogram Statistics OFFSETs: > Minimum difference: -3.5 > Maximum difference: 7 /////////////////////////////////////////////////////////////////////////////////////////////////////////// evalu155:agusanlo/macros/tical> ./intertical -i /l/agusanlo/data/tical/intertical_9/autobinning -o /l/agusanlo/data/tical/intertical_9 > Searching OB available... ID: 1081 ( Laser ) [ 25 runes ] > Found 1 OB! (in a total of 25 runes) >========================================================================================< > Processing OB 1081 ( Laser ) : 1 of 1 (100%) ( 25 runes from 29/06/2011 to 12/12/2011 ) > Offsets (T100): - Line 1 ( -2.9 +/- 0.068 ) ns [ slope = 0.032 ns/m; offset = -9.4 ns] [ Dispersion: ( -2.9 +/- 1.1 ) ns ] [ BAD: DIS ] - Line 2 ( -3.1 +/- 0.11 ) ns [ slope = 0.01 ns/m; offset = -5.2 ns] [ Dispersion: ( -3.1 +/- 1.9 ) ns ] [ BAD: DIS ] - Line 3 ( 0.66 +/- 0.033 ) ns [ slope = 0.0022 ns/m; offset = 0.24 ns] [ Dispersion: ( 0.66 +/- 0.66 ) ns ] [ OK ] - Line 4 ( -2.1 +/- 0.11 ) ns [ slope = -0.071 ns/m; offset = 12 ns] [ Dispersion: ( -2.1 +/- 2 ) ns ] [ BAD: DIS ] - Line 5 ( -3 +/- 0.062 ) ns [ slope = -0.045 ns/m; offset = 6.4 ns] [ Dispersion: ( -3 +/- 1.1 ) ns ] [ BAD: DIS ] - Line 6 ( -0.26 +/- 0.042 ) ns [ slope = 0.014 ns/m; offset = -3.1 ns] [ Dispersion: ( -0.26 +/- 0.79 ) ns ] [ OK ] - Line 7 ( 0.35 +/- 0.048 ) ns [ slope = 0.014 ns/m; offset = -2.3 ns] [ Dispersion: ( 0.35 +/- 0.98 ) ns ] [ BAD: DIS ] - Line 8 ( 7.5 +/- 0.11 ) ns [ slope = 0.039 ns/m; offset = -0.044 ns] [ Dispersion: ( 7.5 +/- 1.3 ) ns ] [ BAD: DIS ] - Line 9 ( -0.13 +/- 0.046 ) ns [ slope = -0.019 ns/m; offset = 3.5 ns] [ Dispersion: ( -0.13 +/- 0.85 ) ns ] [ BAD: DIS ] - Line 10 ( 0.51 +/- 0.052 ) ns [ slope = 0.011 ns/m; offset = -1.6 ns] [ Dispersion: ( 0.51 +/- 0.93 ) ns ] [ BAD: DIS ] - Line 11 ( 5.5 +/- 0.049 ) ns [ slope = -0.0068 ns/m; offset = 6.9 ns] [ Dispersion: ( 5.5 +/- 0.6 ) ns ] [ OK ] - Line 12 ( 2 +/- 0.04 ) ns [ slope = 0.0017 ns/m; offset = 1.6 ns] [ Dispersion: ( 2 +/- 0.62 ) ns ] [ OK ] - Global offset of OK lines: 0 ns. > OK offsets sumary: Line 1 -> (-2.9 ns) [BAD:DIS] Line 2 -> (-3.1 ns) [BAD:DIS] Line 3 -> 0.66 ns Line 4 -> (-2.1 ns) [BAD:DIS] Line 5 -> (-3 ns) [BAD:DIS] Line 6 -> -0.26 ns Line 7 -> (0.35 ns) [BAD:DIS] Line 8 -> (7.5 ns) [BAD:DIS] Line 9 -> (-0.13 ns) [BAD:DIS] Line 10 -> (0.51 ns) [BAD:DIS] Line 11 -> 5.5 ns Line 12 -> 2 ns - Global offset of all lines: 0.43 ns. > All offsets sumary: Line 1 -> (-3.3 ns) [BAD:DIS] Line 2 -> (-3.5 ns) [BAD:DIS] Line 3 -> 0.23 ns Line 4 -> (-2.5 ns) [BAD:DIS] Line 5 -> (-3.4 ns) [BAD:DIS] Line 6 -> -0.69 ns Line 7 -> (-0.083 ns) [BAD:DIS] Line 8 -> (7 ns) [BAD:DIS] Line 9 -> (-0.56 ns) [BAD:DIS] Line 10 -> (0.076 ns) [BAD:DIS] Line 11 -> 5.1 ns Line 12 -> 1.5 ns OB Procesed! >========================================================================================< > All OBs processed. Now choosing favourite lines for each OB: - Favourite lines of OB 1081 ( Laser ) in order are [4 in total]: L03. > Now selecting the OB set with most useful lines to establish a main one: - The best OB set is the OB 1081 (2ns) with the favourite line 3 (0.66ns) and 4 useful lines. > Now normalizing offsets to the best OB set: - Offset of favourite line normalized to the best OB set: -1.3ns - Offset for OB 1081 favourite line 3 after normalize is -1.3ns. >========================================================================================< > Final resume of Offsets (ns): |----------------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------| | OB_IDs | L01 | L02 | L03 | L04 | L05 | L06 | L07 | L08 | L09 | L10 | L11 | L12 | |----------------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------| | 1081 ( Laser ) | -4.8 *| -5 *| -1.3 | -4.1 *| -4.9 *| -2.2 | -1.6 *| +5.5 *| -2.1 *| -1.5 *| +3.6 | -0.012| |----------------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------| | MEAN | ---- | ---- | -1.3 | ---- | ---- | -2.2 | ---- | ---- | ---- | ---- | +3.6 | -0.012| |----------------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------| > Finished! /////////////////////////////////////////////////////////////////////////////////////////////////////////// # LASER Runes para el offset del periodo #9 (29/06/2011 - 12/12/2011 [After Jun'11 HV Tuning and until Dec'11 HV tuning, started 12/12/2011 after run 61522] # @runes = ("61510" ,"61369" ,"61247" ,"61106" ,"60961" ,"60810" ,"60666" ,"60529" ,"60277" ,"60197" ,"60064" ,"59935" ,"59804" ,"59635" ,"59505" ,"59350" ,"59228" ,"59099" ,"58953" ,"58843" ,"58723" ,"58578" ,"58447" ,"58443" ,"58333" ); # @date = (111212 ,111205 ,111128 ,111121 ,111114 ,111107 ,111031 ,111026 ,111014 ,111010 ,111003 ,110926 ,110919 ,110912 ,110905 ,110829 ,110822 ,110815 ,110808 ,110725 ,110718 ,110711 ,110704 ,110704 ,110619 ); # $runcal = "2011:V4.0";