lunes, 19 de marzo de 2012 intertical_8 calibration: Those are the ones with the Laser position corrected. For the other ones look for intertical_8_OLD. #8 #8+off: 59241588 set including laser offsets 8 new T0 set using the 59241588 T0 set including lines offsets computed from 24/11/2010 to 03/01/2011 with the laser position corrected Log available at "ific.uv.es/~agusanlo/calibrations/intertical_8/" /////////////////////////////////////////////////////////////////////////////////////////////////////////// Interline calibration performed with 26 standard Laser-OB calibration runes from 24/11/2010 to 03/01/2011: online calibration "2011:V1.0" modified with real alignment for each run (ASCII calibration files were created): > LABEL = "2011:V1.0" ( VERSION_ID = ? ) > ARS_T0_VERSION = 59241588 walk correction enabled, no more corrections (cross talk) in consideration taken Offsets Found and Applied: Line 1 -> -2.9 ns Line 2 -> -3.5 ns Line 3 -> +0.3 ns Line 4 -> -2.5 ns Line 5 -> -3.3 ns Line 6 -> -0.6 ns Line 7 -> -0.3 ns Line 8 -> +7.0 ns Line 9 -> -0.4 ns Line 10 -> -0.1 ns Line 11 -> +4.8 ns Line 12 -> +1.5 ns Comparing with OLD offsets (#8 bad laser position): ++++++++++++++++++++ Old #8 Line 1 -> -2.4 ns Line 2 -> -2.9 ns Line 3 -> +0.5 ns Line 4 -> -2.1 ns Line 5 -> -3.2 ns Line 6 -> -0.3 ns Line 7 -> -0.5 ns Line 8 -> +6.9 ns Line 9 -> -0.8 ns Line 10 -> -0.3 ns Line 11 -> +4.1 ns Line 12 -> +0.9 ns ++++++++++++++++++++ Lines with important changes: 12, 11, 2, 1 #8 with laser offsets new T0 ID 96,916,817 /////////////////////////////////////////////////////////////////////////////////////////////////////////// evalu155:agusanlo/macros/tical> ./offsetsadder -p intertical_8 -i 59241588 -r 58158 -A -2.9 -B -3.5 -C 0.3 -D -2.5 -E -3.3 -F -0.6 -G -0.3 -H 7.0 -I -0.4 -J -0.1 -K 4.8 -L 1.5 ******************************************* * * * W E L C O M E to R O O T * * * * Version 5.26/00 14 December 2009 * * * * You are welcome to visit our Web site * * http://root.cern.ch * * * ******************************************* ROOT 5.26/00 (trunk@31882, Dec 14 2009, 20:18:36 on linux) CINT/ROOT C/C++ Interpreter version 5.17.00, Dec 21, 2008 Type ? for help. Commands must be C++ statements. Enclose multiple statements between { }. > Wellcome to "offsetsadder"! > ARS_T0_VERSION used in the offsets computation (for the T0s): "59241588" > Last used run in the offsets computation (for the clockphases): 58158 > Searching automatically for tables IDs: > old runTimeStamp = 1292391200 (Wed, 15 Dec 2010 05:33:20 +0000 (GMT) + 0 nsec) > old CLOCK_RUN_ID = 161788 > old CLOCK_CONFIGURATION_ID = 275 > new runTimeStamp = 1308528000 (Mon, 20 Jun 2011 00:00:00 +0000 (GMT) + 0 nsec) > new CLOCK_RUN_ID = 163271 > new CLOCK_CONFIGURATION_ID = 275 > Getting old T0s... > Applying the following offsets to the T0s: · Line 1: -2.9 ns · Line 2: -3.5 ns · Line 3: +0.3 ns · Line 4: -2.5 ns · Line 5: -3.3 ns · Line 6: -0.6 ns · Line 7: -0.3 ns · Line 8: +7 ns · Line 9: -0.4 ns · Line 10: -0.1 ns · Line 11: +4.8 ns · Line 12: +1.5 ns > Output ASCII to DB file: /l/agusanlo/data/tical/intertical_8/cal2DB.txt > Histogram Statistics CLKs: > Minimum difference: -0.041 > Maximum difference: 0.09 > Histogram Statistics OFFSETs: > Minimum difference: -3.5 > Maximum difference: 7 /////////////////////////////////////////////////////////////////////////////////////////////////////////// evalu155:agusanlo/macros/tical> ./intertical -i /l/agusanlo/data/tical/intertical_8/autobinning -o /l/agusanlo/data/tical/intertical_8 > Searching OB available... ID: 1081 ( Laser ) [ 26 runes ] > Found 1 OB! (in a total of 26 runes) >========================================================================================< > Processing OB 1081 ( Laser ) : 1 of 1 (100%) ( 26 runes from 24/11/2010 to 20/06/2011 ) > Offsets (T100): - Line 1 ( -2.9 +/- 0.04 ) ns [ slope = 0.00084 ns/m; offset = -3 ns] [ Dispersion: ( -2.9 +/- 0.64 ) ns ] [ OK ] - Line 2 ( -3.4 +/- 0.091 ) ns [ slope = 0.0039 ns/m; offset = -4.2 ns] [ Dispersion: ( -3.4 +/- 1.6 ) ns ] [ BAD: DIS ] - Line 3 ( 0.34 +/- 0.034 ) ns [ slope = 0.0049 ns/m; offset = -0.61 ns] [ Dispersion: ( 0.34 +/- 0.69 ) ns ] [ OK ] - Line 4 ( -2.4 +/- 0.098 ) ns [ slope = -0.063 ns/m; offset = 9.9 ns] [ Dispersion: ( -2.4 +/- 1.9 ) ns ] [ BAD: DIS ] - Line 5 ( -3.2 +/- 0.053 ) ns [ slope = -0.039 ns/m; offset = 4.8 ns] [ Dispersion: ( -3.2 +/- 0.92 ) ns ] [ BAD: DIS ] - Line 6 ( -0.53 +/- 0.044 ) ns [ slope = 0.007 ns/m; offset = -1.9 ns] [ Dispersion: ( -0.53 +/- 0.75 ) ns ] [ OK ] - Line 7 ( -0.21 +/- 0.047 ) ns [ slope = 0.013 ns/m; offset = -2.8 ns] [ Dispersion: ( -0.21 +/- 0.89 ) ns ] [ BAD: DIS ] - Line 8 ( 7.1 +/- 0.086 ) ns [ slope = 0.023 ns/m; offset = 2.5 ns] [ Dispersion: ( 7.1 +/- 0.9 ) ns ] [ BAD: DIS ] - Line 9 ( -0.34 +/- 0.056 ) ns [ slope = -0.018 ns/m; offset = 3.1 ns] [ Dispersion: ( -0.34 +/- 1.1 ) ns ] [ BAD: DIS ] - Line 10 ( -0.039 +/- 0.041 ) ns [ slope = 0.014 ns/m; offset = -2.8 ns] [ Dispersion: ( -0.039 +/- 0.76 ) ns ] [ OK ] - Line 11 ( 4.9 +/- 0.048 ) ns [ slope = -0.0083 ns/m; offset = 6.6 ns] [ Dispersion: ( 4.9 +/- 0.6 ) ns ] [ OK ] - Line 12 ( 1.6 +/- 0.036 ) ns [ slope = 0.0056 ns/m; offset = 0.54 ns] [ Dispersion: ( 1.6 +/- 0.62 ) ns ] [ OK ] - Global offset of OK lines: 0 ns. > OK offsets sumary: Line 1 -> -2.9 ns Line 2 -> (-3.4 ns) [BAD:DIS] Line 3 -> 0.34 ns Line 4 -> (-2.4 ns) [BAD:DIS] Line 5 -> (-3.2 ns) [BAD:DIS] Line 6 -> -0.53 ns Line 7 -> (-0.21 ns) [BAD:DIS] Line 8 -> (7.1 ns) [BAD:DIS] Line 9 -> (-0.34 ns) [BAD:DIS] Line 10 -> -0.039 ns Line 11 -> 4.9 ns Line 12 -> 1.6 ns - Global offset of all lines: 0.075 ns. > All offsets sumary: Line 1 -> -2.9 ns Line 2 -> (-3.5 ns) [BAD:DIS] Line 3 -> 0.27 ns Line 4 -> (-2.5 ns) [BAD:DIS] Line 5 -> (-3.3 ns) [BAD:DIS] Line 6 -> -0.6 ns Line 7 -> (-0.28 ns) [BAD:DIS] Line 8 -> (7 ns) [BAD:DIS] Line 9 -> (-0.42 ns) [BAD:DIS] Line 10 -> -0.11 ns Line 11 -> 4.8 ns Line 12 -> 1.5 ns OB Procesed! >========================================================================================< > All OBs processed. Now choosing favourite lines for each OB: - Favourite lines of OB 1081 ( Laser ) in order are [6 in total]: L01. > Now selecting the OB set with most useful lines to establish a main one: - The best OB set is the OB 1081 (0.57ns) with the favourite line 1 (-2.9ns) and 6 useful lines. > Now normalizing offsets to the best OB set: - Offset of favourite line normalized to the best OB set: -3.4ns - Offset for OB 1081 favourite line 1 after normalize is -3.4ns. >========================================================================================< > Final resume of Offsets (ns): |----------------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------| | OB_IDs | L01 | L02 | L03 | L04 | L05 | L06 | L07 | L08 | L09 | L10 | L11 | L12 | |----------------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------| | 1081 ( Laser ) | -3.4 | -4 *| -0.23 | -3 *| -3.8 *| -1.1 | -0.78 *| +6.5 *| -0.91 *| -0.61 | +4.3 | +1 | |----------------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------| | MEAN | -3.4 | ---- | -0.23 | ---- | ---- | -1.1 | ---- | ---- | ---- | -0.61 | +4.3 | +1 | |----------------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------|--------| > Finished! /////////////////////////////////////////////////////////////////////////////////////////////////////////// # LASER Runes para el offset del periodo #8 (03/11/2010 - 31/12/2010 [After reconection of Lines 6 & 9 and HV Tuning and until Summer'11 HV tuning... not included in laser runsetup until 29th June] # @runes = ("53391" ,"53892" ,"53985" ,"54160" ,"58158" ,"58026" ,"57895" ,"57736" ,"57628" ,"57460" ,"57369" ,"57239" ,"57087" ,"56790" ,"56584" ,"56115" ,"55960" ,"55766" ,"55640" ,"55280" ,"55141" ,"54955" ,"54855" ,"54689" ,"54471" ,"54308" ); # @date = (101124 ,101216 ,101220 ,101227 ,110620 ,110613 ,110606 ,110530 ,110525 ,110516 ,110511 ,110505 ,110427 ,110411 ,110404 ,110321 ,110314 ,110307 ,110228 ,110214 ,110207 ,110131 ,110126 ,110118 ,110110 ,110103 ); # $runcal = "2011:V1.0";